English - 30

Switching between Anynet ¦+ Devices
1. Press the TOOLS button. Press the
E
button to select Anynet+
(HDmI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the
E
button.
Anynet N+ devices connected to the TV are listed.
If you cannot nd a device you want, press the red button to Nscan for devices.
3. Press the ▲ or ▼ button to select a particular device and press
the
E
button. It is switched to the selected device.
Only when you set NAnynet+ (HDmI-CEC) to On in the
Application menu, the Device List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation Nduring the switching operation.
The time required to scan for devices is determined by the number of connected devices. N
When the device scan is complete, the number of devices found are not displayed. N
Although the TV automatically searches the device list when the TV is turned on via the power Nbutton, devices connected to the TV when the TV is on or under some conditions are not
automatically displayed in the device list. Press the red button to search for the connected
device.
If you have selected external input mode by pressing the NSOURCE button, you cannot use the
Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

Anynet+ menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to
the TV.
Anynet+ menu Description
View TV Anynet+ mode changes to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) menu Shows the connected device menus. E.g. If a DVD recorder is
connected, the disc menu of the DVD recorder will appear.
(device_name)
Operation
Shows the play menu of the connected device. E.g. If a DVD recorder
is connected, the play menu of the DVD recorder will appear.
Record: (*recorder) Starts recording immediately using the recorder. (This is only available
for devices that support the recording function.)
Stop Recording:
(*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one Nrecording device is connected, it will be represented as (*device_name).
View TV
Device List
Record : DVDR
DVDR Menu
DVDR Operation
Setup
U
Move
E
Enter
R
Return
Device List