HP 625n Gigabit Ethernet Print Server manual Table B.2 HP Jetdirect Graphical Control Panel Menu 3

Table B.2 HP Jetdirect Graphical Control Panel Menu (3 of 4)

Menu Item	Options	Description of settings
	PRIMARY DNS	Specify the IP address (n.n.n.n) of a Primary
		DNS Server.
	SECONDARY DNS	Specify the IP address (n.n.n.n) of a
		Secondary Domain Name System (DNS)
		Server.
	PROXY SERVER	Specifies the proxy server to be used by
		embedded applications in your printer/MFP.
		A proxy server is typically used by network
		clients for Internet access. It caches Web
		pages, and provides a degree of Internet
		security, for those clients.
		To specify a proxy server, enter its IP address
		or fully-qualified domain name. The name can
		be up to 255 octets.
		For some networks, you may need to contact
		your Independent Service Provider (ISP) for
		the proxy server address.
	PROXY PORT	Enter the port number used by the proxy
		server for client support. The port number
		identifies the port reserved for proxy activity
		on your network, and can be a value from 0
		to 65535.
IPX/SPX	ENABLE	ON: Enable the IPX/SPX protocol
		OFF: Disable the IPX/SPX protocol
	FRAME TYPE	Selects the frame type setting for your
		network.
		AUTO (default): Automatically sets and limits
		the frame type to the first one detected.
		EN_8023, EN_II, EN_8022, EN_SNAP:
		Frame type selections for Ethernet
		networks.
APPLETALK	ENABLE	(Ethernet/Fast Ethernet only)
		ON: Enable the AppleTalk protocol
		OFF: Disable the AppleTalk protocol
DLC/LLC	ENABLE	ON: Enable the DLC/LLC protocol
		OFF: Disable the DLC/LLC protocol

ENWW The HP Jetdirect EIO Control Panel Menu 251