Table 4.14 802.1X Configuration Settings (2 of 2)
Item | Description |
|
|
Authentication | Enable (check) or disable (clear) this checkbox to control |
Behavior: | authentication when you click Apply on this page, |
Reauthenticate on | assuming valid configuration entries have been made. |
Apply | Note: This parameter does not apply to security or other |
| configuration wizards. Changes to parameters through |
| a wizard will always cause the print server to |
| reauthenticate. |
| If disabled (default), the print server will not attempt |
| reauthentication unless configuration changes cause the |
| print server to disconnect and reconnect to the network. |
| If enabled, the print server will always try to reauthenticate |
| using the configuration values set. |
|
|
Wireless
Use this link to manage secure wireless configuration settings. For the features and parameter settings on this page, see Table 4.3.
Network Statistics
This page is used to display counter values and other status information currently stored on the HP Jetdirect print server. This information is often useful to diagnose performance and operational problems associated with the network or network device.
Protocol Info
This page provides a list of various network configuration settings on the HP Jetdirect print server for each protocol. Use these lists to validate your desired settings.
Configuration Page
This page provides a view of the HP Jetdirect configuration page that contains a summary of HP Jetdirect status and configuration information. The contents of this page are described in Chapter 9.
ENWW | Using the Embedded Web Server 152 |
