HP 625n Gigabit Ethernet Print Server manual Security Settings 1, Ssl/Tls

Security Settings

Information in this section of the Jetdirect configuration page is described in Table 9.4.

Table 9.4	Security Settings (1 of 3)
Message		Description
802.1X		Identifies whether the print server has been configured with
		EAP/802.1X client authentication settings.
		Specified: 802.1X authentication has been configured.
		Not Specified: 802.1X authentication has not been
		configured.
Admin Password:		Specifies whether an IP Administrator password has been
		configured on the print server. This password is shared by
		Telnet, the embedded Web server, and HP Web Jetadmin
		to control access to print server configuration parameters.
		Up to 16 case-sensitive, alphanumeric characters can be
		used.
		Not Set: An Administrator password has not been set.
		Set: An Administrator password has been set.
		(The password may be cleared from the print server through
		a cold reset.)
SSL/TLS		Status of Secure Sockets Layer/Transport Layer Security
		(SSL/TLS) protocols.
		Disabled: SSL/TLS is disabled.
		<certificate string>: A character string that identifies the
		certificate common name.
Cert Expires:		Specifies the expiration date of the digital certificate for
		SSL/TLS encrypted security. The date is in UTC format (for
		example, “2002-10-02 12:45 UTC”).
		Not Applicable: Displayed if a digital certificate has not been
		installed.

ENWW HP Jetdirect Configuration Page 211