Chapter 8: MENU mode/SYS SETUP menu

Chain play mode setting [Chain play]

The “Chain play” menu item selects how the recorder behaves after playback of an audio file finishes.

By default, the recorder stops at the playback end point. However, you can make the recorder pause at the beginning of the next audio file or play the next audio file until all audio files on a disk (or a partition) are played back.

1)While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the [ENTER/YES] key.

2)While “SYS SETUP” is highlighted, press the [ENTER/YES] key.

The display now shows the SYS SETUP menu screen.

3)Use the [MENU] dial to select the “Chain play” menu item and press the [ENTER/YES] key.

The current setting starts flashing and you can now select the desired option.

Flashing

 

 

Options

 

You can select from among “Off”, “Pause” and “AutoPly (the default is “Off”).

 

 

 

Off

 

The unit stops when an audio file is played back to the end.

 

 

 

Pause

 

The unit pauses at the beginning of the next audio file when an audio file is played

 

back to the end.

 

 

 

 

 

 

 

The unit continuously plays back all audio files following the current file on the cur-

AutoPly

 

rent disk (or partition) in the numerical order. When the unit plays back the last file to

 

 

the end, it stops.

 

 

 

4)Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm your setting.

5)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD204

163

Page 163
Image 163
Fostex PD204 owner manual Chain play mode setting Chain play, 163, AutoPly