Fostex PD204 owner manual Time code output while paused Rep pause TC, 187, Off

Chapter 8: MENU mode/TC SETUP menu

Time code output while paused [Rep pause TC]

Using the "Rep pause TC" menu item, you can select whether time code is output from the [TIME CODE OUT] connector or not while the recorder is paused.

1)When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the [TIME/TC SET] key.

The display now shows the TC SETUP menu screen.

2)Use the [MENU] dial to select the “Rep pause TC” menu item, and press the [ENTER/YES] key.

The current setting starts flashing and you can now select "On" or "Off".

Flashing

3)Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm your selection.

Options

You can select from among “On” and “Off” (the default is “Off”).

On	When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or paused), a
	paused time code value (same time code value) is output intermittently.
Off	When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or paused), no
	time code is output.

4)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD204 187