Fostex PD204 owner manual Partition protection On/Off setting Part. protect, 205

Chapter 8: MENU mode/DISK UTILITY menu

Partition protection On/Off setting [Part. protect]

Using the "Part. protect" menu item, you can select "On" or "Off" of the software protection (record inhibit) for the current partition.

The following procedure assumes that a partition you want to make protection setting is se- lected as the current drive.

<Note>: If a partition is not selected as the current drive, "---" is shown.

1)While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the [ENTER/YES] key.

The unit enters the MENU mode and the MENU list screen is shown.

2)Use the [MENU] dial to select the “DISK UTILITY” menu and press the [ENTER/YES] key.

The display now shows the DISK UTILITY menu screen.

3)Use the [MENU] dial to select the "Part. protect" menu item and press the [ENTER/YES] key.

The current option ("On" or "Off") starts flashing (the default is "Off") and you can now select the desired option.

Flashing

4)Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your setting.

5)Press the [EXIT] key repeatedly until you exit the MENU mode.

<Note>: When a protected partition is loaded, the "" icon is shown on the Home display as well as the DRIVE SEL display as shown below.

Location Recorder Model PD204 205