Fostex PD204 owner manual 201, While Execute is highlighted, press the ENTER/YES key

Chapter 8: MENU mode/DISK UTILITY menu

<Note>: It takes a long time to execute the physical format.

We recommended executing the physical format when disk access time becomes longer or sound interruption occurs in normal use. You do not need to physical format a brand-new or relatively new disk. However, regardless of whether the for- mat mode is “Normal” or “DDR”, there may be a case that “Physical Format” on the Format screen is automatically set to “On” and you cannot select “Off”.

In this case, the PD204 decides that the disk to be formatted needs the physical format and you must execute the physical format.

After selecting the desired option, pressing the [ENTER/YES] key automatically high- lights "[EXECUTE]".

5)While "[EXECUTE]" is highlighted, press the [ENTER/YES] key.

The "CAUTION" message appears and "Are you sure?" flashes. To cancel formatting, press the [EXIT] key.

Flashing

6)Press the [ENTER/YES] key.

The unit starts formatting the disk.

The display shows the formatting progress. When formatting completes, the display shows "Fmt. Completed!".

<Note>: The progress indication shows estimated information. Do not carry out any operation until “Fmt. Completed!” is shown.

7)Press the [EXIT] key repeatedly until you exit the MENU mode.

<Note>: If you format a DVD-RAM disk while a hard disk partition is selected as the current drive, the DVD-RAM is not selected as the current partition after completing formatting.

In other words, only when you format a partition of the internal hard disk while the DVD-RAM drive is selected as the current drive, the current drive changes after com- pleting formatting.

Location Recorder Model PD204 201