Chapter 8: MENU mode/SYS SETUP menu

• Input clip On/Off setting

Use the [MENU] dial to select the “Input clip” and press the [ENTER/YES] key. The current setting starts flashing and you can now select the desired option.

Flashing

Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm your setting.

Options

You can select between “On” and “Off” (the default is “On”).

If the peak indicator lights due to input overload during ana- log recording or clipping of stereo buss while you set "Input clip" to "On", the warning tone is output by the pattern on the right.

• BATT warning On /Off setting

Use the [MENU] dial to select the “BATT warning” and press the [ENTER/YES] key. The current setting starts flashing and you can now select the desired option.

Flashing

Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm your setting.

Options

You can select between “On” and “Off” (the default is “On”).

If the battery voltage drops below the threshold voltage set by the "BATT. warning" (BATTERY SETUP) menu item while you set "BATT warning" to "On", the warning tone is output by the pattern on the right.

If the warning tone above is output during recording, re- cording automatically stops after one minute.

<Note>: For details about how to set the battery threshold voltage for warning, see "Battery warning setting" on page 172.

Location Recorder Model PD204

161

Page 161
Image 161
Fostex PD204 owner manual 161, Input clip On/Off setting, Batt warning On /Off setting