Fostex PD204 owner manual 139, After entering the scene name, press the ENTER/YES key

Chapter 8: MENU mode/SYS SETUP menu

6)Use the [MENU] dial to select “SCENE NAME”, and press the [ENTER/YES] key.

Flashing

7)Use the [MENU] dial or alphanumeric keys entering the desired scene name, press the [ENTER/YES] key to confirm your setting.

Use the []/[] keys to move the cursor position. By pressing the [CLEAR] key when the cursor is pointing any character of the name, you can clear the whole name.

Scene name

Up to 247 ASCII characters can be entered (note that only 55 characters are valid for BWF). “.wav”, the file extension, is automatically added, therefore, you do not need to enter it.

8)After entering the scene name, press the [ENTER/YES] key.

The scene name is confirmed and you can now set a take number.

Flashing

9)Use the [MENU] dial or alphanumeric keys to enter the desired take number, and press the [ENTER/YES] key to confirm your setting.

Take number

Any number between 001 and 999 can be entered.

<Note>: If you enter “000” to the TAKE NUMBER field, it is automatically set as “001”.

10)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD204 139