Fostex PD204 owner manual Default track name setting Default TrkName

Chapter 8: MENU mode/SYS SETUP menu

Default track name setting [Default TrkName]

The “Default TrkName” menu item specifies the default track name for each track of a BWF file created when recording is made.

The track name specified is automatically added to the track number whenever an audio file is created. The data is recorded to each file as the “fTRKn” information of the BWF BEXT Chunk Description. The default track name is stored in the System ROM of the unit.

1)While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the [ENTER/YES] key.

2)While “SYS SETUP” is highlighted, press the [ENTER/YES] key.

The display now shows the SYS SETUP menu screen.

3)Use the [MENU] dial to select the “Default TrkName” menu item and press the [ENTER/YES] key.

The display now shows the current track name of each track.

4)Use the [MENU] dial to select a track number and press the [ENTER/YES] key.

You are ready for entering the track name.

Flashing

5)Use the [MENU] dial or alphanumeric keys to enter the desired track name, and press the [ENTER/YES] key to confirm your setting.

Use the []/[] keys to move the cursor position. By pressing the [CLEAR] key when the cursor is pointing the character, you can clear the whole name.

6)Press the [EXIT] key repeatedly until you exit the MENU mode.

<Note>: You can change track names of a file later by using the “Edit descriptor” function of the “File Info.” menu item in the “DISK UTILITY” menu (see page 192).

140 Location Recorder Model PD204