Fostex PD204 owner manual 100, Locating to the desired time

Chapter 5: Recording/Playback

Locating to the desired time

You can locate the recorder to the desired position by specifying the time value.

1)While the recorder is stopped (or playing back), press any one of alphanumeric keys.

The unit enters time edit mode and the EDIT TIME screen pops up on the display.

POWER	QUICK SET	TIME	FILE SEL LIGHT	EXIT
ON
OFF
	SHIFT	TC SET	DRV,PAT CONTRAST	BATT
AUX	ST		ACCESS
C2	MONO
C1	L/M		HDD	DVD
MS	R/S

PD204 LOCATION RECORDER

MONITOR

MIN MAX

PHONES

ENTER	space	ABC	DEF	LOCATE	FILE		CUE		CIRCLE TAKE
YES										PAUSE	REC
	1	2	3
	GHI	JKL	MNO	CLEAR	PREV CUE NEXT
MENU					PRE REC JAM		SLATE		FALSE START
	4	5	6
	PQRS	TUV	WXYZ	symbol		ON		TONE
						OFF		OFF
								MIC
	7	8	9	0
	space	ABC	DEF
1	2		3

GHI JKL MNO

456

PQRS TUV WXYZ symbol

7 8 9 0

<Note>: The time value can be specified according to the time display mode se- lected before entering time edit mode. In the screen example above, you can specify the time value in LTC.

2)Enter the desired time value using the [MENU] dial (or alphanumeric keys).

You can move the field to be edited using the [] / [] keys. Pressing the [CLEAR] key resets the time value to "00h 00m 00s 00sf".

You can enter the time value between “00h 00m 00s 00f 00sf” and “23h 59m 59s **f **sf” (** depends on the frame rate of the audio file).

3)After entering desired time value, press the [LOCATE] key.

The recorder quickly locates to the position at the specified time.

<Note>: If you enter a time value which is out to the current file and press the [LOCATE] key, “Out of Zone” is shown and the locate operation is not executed.

100 Location Recorder Model PD204