Fostex PD204 owner manual 105, Selecting auto copy mode

Chapter 6: Advanced operations

2)Use the [MENU] dial to select the desired partition and press the [ENTER/YES] key.

The display changes to show the Home screen for the selected partition.

The following shows the screen example when you select unused partition 2 (P02).

Selecting auto copy mode

You can make setting of the auto copy mode via the "Auto copy" item in the "SYS SETUP" menu of the MENU mode. The following procedure assumes that an unused DVD-RAM disk is set to the DVD multi drive.

1)While the unit is stopped, press the [SHIFT] key to light [SHIFT] indicator, followed by the [ENTER/YES] key.

The display now shows the MENU list screen.

2)While “SYS SETUP” is highlighted, press the [ENTER/YES] key.

The display now shows the SYS SETUP menu screen.

3)Use the [MENU] dial to select the “Auto copy” menu item and press the [ENTER/YES] key.

The current setting flashes and you can now select the desired auto copy mode. By default, “Off” flashes.

Flashing

You can select from among “Off”, “BGRD” (Background) and “IMME” (Immediately).

4)Use the [MENU] dial to select the desired option and press the [ENTER/YES] key.

After the display shows “Setup auto copy” followed by “Ready auto copy”, the selected mode is set. In this procedure example, it is assumed that “IMME” is selected.

Location Recorder Model PD204 105