Fostex PD204 owner manual Project name setting Set project name, 137

Chapter 8: MENU mode/SYS SETUP menu

Project name setting [Set project name]

The "Set project name" menu item sets the project name recorded to an iXML file.

1)While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the [ENTER/YES] key.

2)While “SYS SETUP” is highlighted, press the [ENTER/YES] key.

The display now shows the SYS SETUP menu screen.

3)Use the [MENU] dial to select the “Set project name” menu item and press the [ENTER/YES] key.

The display now shows the screen for entering a project name.

Flashing

4)Use the [MENU] dial or alphanumeric keys entering the desired project name, press the [ENTER/YES] key to confirm your setting.

Use the []/[] keys to move the cursor position. By pressing the [CLEAR] key when the cursor is pointing any character of the name, you can clear the whole name.

The project name is stored to the Flash ROM of the unit, while recorded to an iXML file.

Characters you can enter using the [MENU] dial

Alphabetical characters: A ~ Z, a ~ z

Numerical characters: 0 ~ 9

Symbols: !, #, $, %, &, ’, (, ), +, -, ., /, =, @, [, ], ^, _, ->, <-, space

Characters you can enter using the alphanumeric keys

Alphabetical characters: A ~ Z, a ~ z

Numerical characters: 0 ~ 9

Symbols: !, #, $, %, &, ’, (, ), +, -, ., /, =, @, [, ], ^, _, space

5)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD204 137