Fostex PD204 owner manual Limiter parameter setting Limiter parameter, Grouping setting

Chapter 8: MENU mode/SYS SETUP menu

Limiter parameter setting [Limiter parameter]

The “Limiter parameter” menu item makes parameter setting for the limiter.

1)While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the [ENTER/YES] key.

2)While “SYS SETUP” is highlighted, press the [ENTER/YES] key.

The display now shows the SYS SETUP menu screen.

3)Use the [MENU] dial to select the “Limiter parameter” menu item and press the [ENTER/YES] key.

You can set “Grouping”, “Threshold” and “Ratio” parameters.

• Grouping setting

Use the [MENU] dial to select the “Grouping” and press the [ENTER/YES] key. The current setting starts flashing.

Flashing

Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm your setting.

Options

Selectable between “Mono” and “1-4” (the default is “Mono”).

Mono The limiter for each channel works independently.
1-4	Channels 1 through 4 are grouped, and limiters for channels 1 through 4 work the same
	according to the input levels of channels 1 through 4.

*The limiter for the stereo buss is always L-R linked.

• Threshold level setting

Use the [MENU] dial to select the “Threshold” and press the [ENTER/YES] key. The current setting starts flashing.

Flashing

156 Location Recorder Model PD204