Fostex PD204 Exit / Batt key, MENU/LINK Master dial / ENTER/YES key, Access indicator HDD, DVD

Chapter 3: Names and Functions

EXIT

BATT

ENTER

YES

MENU

7.[EXIT / BATT] key

Used to cancel an edit operation or execution, as well as used to exit the MENU mode.

While the Home screen is shown, pressing and holding down this key switches the screen to show the battery remaining condition instead of the stereo bus bar-graph meters (see page 26).

8.[MENU]/[LINK MASTER] dial / [ENTER/YES] key

You can rotate or press this knob. This knob has two main functions.

• [MENU] dial function:

In the MENU or editing mode, rotating this knob selects an item, option, alphanumeric character, etc.

• [ENTER/YES] key function.

When unSHIFTed, pressing this knob confirms the setting or executes a function. When SHIFTed, pressing this knob brings up the main menu screen.

<Note>: In this manual, we describe this knob as the [MENU] dial or [ENTER/YES] key, depending on the function used.

ACCESS

HDD DVD

9.[ACCESS] indicator (HDD, DVD)

Each indicator Indicates the access condition of the internal hard disk drive or the DVD-RAM drive.

Each indicator lights in green while the corresponding drive is not accessed, in orange while it is accessed for reading, and in red while it is accessed for writing.

*When no disk is set to the DVD-RAM drive, the "DVD" indicator is unlit.

	space	ABC	DEF	10.	Alphanumeric keys
1	2	3			While the display shows the Home screen, pressing any of the
					alphanumeric keys enters the time data edit mode. After editing time
	GHI	JKL	MNO
4	5	6			data, you can locate to the edited time position by pressing the [LOCATE]
					key (see page 101). While the unit is in any of the edit modes, you can
	PQRS	TUV	WXYZ	symbol
7	8	9		0	enter time data or name.
					<Key example>: Using the "3" key, you can enter "d", "e", "f", "D", "E" and
					"F", as well as "3".
		LOCATE		11.	[LOCATE] key
					Locates to the desired position in the following manners.

•While a cue point is selected, pressing the key locates to the selected cue point (see page 102).

•While time data is being edited, pressing the key locates to the edited time position (see page 101).

•While the display shows the Home screen, pressing the key locates to the point previously located to (the default setting is "ABS 0")(see page 100).

46 Location Recorder Model PD204