Fostex PD204 owner manual Selecting the drive for recording, When the DVD drive is selected

Chapter 5: Recording/Playback

Selecting the drive for recording

The PD204 is equipped with the DVD multi drive and hard disk drive.

Before recording, select the drive to which recording is made. By default, partition 1 (PT01) on the hard disk drive is selected as the current drive.

To record to a DVD-RAM disk or another partition, select the desired drive by following the procedure below.

In the procedure below, it is assumed that a formatted DVD-RAM disk is set to the DVD drive.

					FILE SEL
SHIFT
					DRV,PAT.
							ENTER	space	AB
POWER			QUICK SET	TIME	FILE SEL LIGHT	EXIT	YES
ON								1	2
								GHI	JK
OFF
		SHIFT		TC SET	DRV,PAT CONTRAST	BATT	MENU	4	5
AUX	ST				ACCESS			PQRS	TU
C2	MONO
C1	L/M				HDD	DVD		7	8
MS	R/S
			PD204 LOCATION RECORDER
MONITOR

1)While stopped, press the [SHIFT] key to enter shift mode, followed by the [FILE SEL / DRV, PAT.] key.

The display changes to show the screen for selecting a drive. On the screen, the current selection is initially highlighted.

<Note>: You can also bring up the screen for selection a drive (as shown above) by the following methods.

1)While stopped, press the [SHIFT] key to enter shift mode, followed by the [ENTER/YES] key.

The display shows the MENU list screen for selecting the desired main menu.

2)Use the [MENU] dial to select "DRV/PAT SEL" and press the [ENTER/YES] key.

The display shows the screen for selecting a drive as above.

2)Use the [MENU] dial to select the desired drive (the DVD drive or a partition) and press the [ENTER/YES] key.

The selected drive is loaded and the display shows the Home screen of the current drive as below (in the both examples below, no recording has been made to the current drive).

<When the DVD drive is selected> <When partition 2 is selected>

84 Location Recorder Model PD204