Fostex PD204 Monitoring recording signals, Monitor select dial Monitor control Phones jack

Chapter 5: Recording/Playback

Monitoring recording signals

You can monitor recording signals via headphones or the internal monitor speaker.

While a plug is inserted to the [PHONES] jack, the internal speaker automatically turns off, and you can monitor the signals only via headphones.

The monitor level can be adjusted by the [MONITOR] control. This control can be pushed- lock. By pushing down the control, you can put it down to the panel height level. By pressing the control again, it comes out and you can rotate the control to adjust the level.

<Note>: By default, the internal monitor speaker is automatically muted during record- ing. You can select on or off of this mute function via the "Speaker mute" item in the "SYS SETUP" menu of the MENU mode (see page 159).

Monitor select dial

[MONITOR] control

[PHONES] jack

					ENTER
POWER	QUICK SET	TIME	FILE SEL LIGHT	EXIT	YES
ON
OFF
	SHIFT	TC SET	DRV,PAT CONTRAST	BATT	MENU
AUX	ST		ACCESS
	MONO
C1	L/M		HDD	DVD
MS	R/S
	PD204 LOCATION RECORDER
MONITOR

MIN MAX

PHONES

space

1

GHI

4

PQRS

7

Depending on the settings of the monitor select dial, you can monitor the sound as shown on the table below.

	Record	Playback
ST	L: BUS L, R: BUS R	L: ST L, R: ST R
MONO	BUS L+R (MONO)	ST L+R (MONO)
L/M	BUS L (MONO)	ST L (MONO)
R/S	BUS R (MONO)	ST R (MONO)
M/S	L: BUS MS L, R: BUS MS R	L: ST MS L, R: ST MS R
C1	For the future expansion. No monitor signal is assigned on this version.
C2	For the future expansion. No monitor signal is assigned on this version.
AUX	L: AUX L, R: AUX R	L: AUX L, R: AUX R

By pressing any of the [PFL/SEL] keys on channels 1 through 4, you can monitor Pre-fader listen of the corresponding channel(s).

[PFL/SEL] keys

Location Recorder Model PD204 83