Fostex PD204 owner manual Record protection On/Off setting Rec protect, 203

Chapter 8: MENU mode/DISK UTILITY menu

Record protection On/Off setting [Rec protect]

Using the "Rec protect" menu item, you can select "On" or "Off" of the protection (record inhibit) for the currently loaded audio file.

The following procedure assumes that an audio file you want to make protection setting is loaded.

<Note>: You cannot edit a protected audio file.

1)While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the [ENTER/YES] key.

The unit enters the MENU mode and the MENU list screen is shown.

2)Use the [MENU] dial to select the “DISK UTILITY” menu and press the [ENTER/YES] key.

The display now shows the DISK UTILITY menu screen.

3)Use the [MENU] dial to select the "Rec protect" menu item and press the [ENTER/YES] key.

The current option ("On" or "Off") starts flashing (the default is "Off") and you can now select the desired option.

Flashing

4)Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your setting.

<Note>: If you enter the UTILITY menu when no file is available on the current disk,

"Rec protect:---" is shown instead of "Rec protect: Off (or On)". This means there is no audio file to which the "Rec protection" setting is applied. If you select it and press the [ENTER/YES] key in this case, "Void!" is shown.

<Note>: The PD204 can protect each partition of the optional hard disk drive. See "Partition protection On/Off setting [Part. protect]" on page 205 for details.

5)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD204 203