HP 625n Gigabit Ethernet Print Server Table B.1 HP Jetdirect Classic Control Panel Menu 3, Web=

Table B.1 HP Jetdirect Classic Control Panel Menu (3 of 3)

Menu Item	Description
CFG LINK=	Selects whether you want to manually configure the HP Jetdirect
	print server’s network link.
	NO (default): Bypass the link configuration menu items.
	YES: Access the link configuration menu items.
	The link speed and communication mode must match the
	network. One of the following link configurations can be set:
	AUTO (default): The print server will automatically configure itself
	to match the network’s link speed and communication mode.
	If it fails, 100TX Half will be set.
	10T HALF: 10Mbps, half-duplex operation
	10T FULL: 10 Mbps, full-duplex operation
	100TX HALF: 100 Mbps, half-duplex operation
	100TX FULL: 100 Mbps, full-duplex operation
WEB=	For configuration management, specify whether the embedded
	Web server will accept communications using HTTPS (Secure
	HTTP) only, or both HTTP and HTTPS.
	HTTPS: For secure, encrypted communications, only HTTPS
	access is accepted. The print server will appear as a secure
	site.
	HTTP/HTTPS: Access using either HTTP or HTTPS is permitted.
SECURITY=	Specify whether the current security settings on the print server
	will be saved or reset to factory defaults.
	KEEP (default): The current security settings are maintained.
	RESET: Security settings are reset to factory defaults.

ENWW The HP Jetdirect EIO Control Panel Menu 248