Table 4.7 | SNMP Settings (2 of 2) | |
|
|
|
Item |
| Description |
|
| |
Disable SNMPv1/v2 | This option disables the SNMP v1/v2c agents on the print | |
|
| server, which is recommended for secure environments. If |
|
| SNMP v1/v2c is disabled, some port monitors or discovery |
|
| utilities may not operate properly. |
|
| |
Enable SNMPv3 | ||
|
| enables (check) or disables (clear) the SNMP v3 agent on |
|
| the print server. |
|
| When enabled, an SNMP v3 account must be created on |
|
| the print server, and the account information must be |
|
| implemented on the SNMP v3 management application. |
|
| You may create an account by providing the following |
|
| information: |
|
| User Name: the SNMP v3 account user name. |
|
| Authentication Key: a |
|
| authenticating the SNMP packet contents using the |
|
| Message Digest Algorithm 5 (MD5, RFC 1321). |
|
| Privacy Key: a |
|
| the data portion of the SNMP packet using the Data |
|
| Encryption Standard (DES) algorithm. |
|
| Context Name: the view context in which this user can |
|
| access SNMP objects. It is always “Jetdirect”. |
|
|
|
Other Settings
This item provides access to a variety of management and printing configuration options. The following tabs are provided:
●Misc. Settings: for enabling miscellaneous advanced protocols and functions
●Firmware Upgrade: to update your HP Jetdirect print server with new features and enhancements (model ew2400 upgrade features are limited and require a wired network connection)
●LPD Queues: for setting up print queues used in printing under LPD (line printer daemon) printing services
●USB Settings: (external print servers only) to configure Universal Serial Bus connection parameters
●Support Info: to set up the Support link located under Other Links in the left margin
●Refresh Rate: to set the time interval (in seconds) for embedded Web diagnostic page updates
ENWW | Using the Embedded Web Server 122 |
