AppleTalk
The AppleTalk tab allows you to configure selected AppleTalk settings on the HP Jetdirect print server. See Table 4.6 for a description of items on this page.
Note | The AppleTalk parameters displayed include the |
| AppleTalk printer types that are advertised on |
| the network. |
| The HP Jetdirect print server supports AppleTalk |
| Phase 2 only. |
|
|
Table 4.6 | AppleTalk Settings | |
Item |
| Description |
|
| |
AppleTalk Enable | Enable (check) or disable (clear) the AppleTalk protocol on the | |
checkbox |
| print server. If AppleTalk is enabled, AppleTalk parameters |
|
| stored on the print server are displayed. |
|
|
|
Device |
| Specify the name of the printer on the AppleTalk network. If you |
(AppleTalk) Name | enter a name that is already assigned on your network, the | |
|
| AppleTalk name specified on the Jetdirect configuration page will |
|
| be followed by a number to indicate that it is a duplicate. |
|
|
|
Print Type |
| Identify the type of printer being advertised on the network. Up |
|
| to two types can be displayed (for example, HP LaserJet and |
|
| LaserWriter). |
|
|
|
Zone |
| Select an available AppleTalk network zone for the printer. By |
|
| default, the zone currently selected will be displayed. |
|
| Click the Refresh selected zone Info button to refresh the list |
|
| of available zones. |
|
|
|
DLC/LLC
Using the checkbox provided, you can enable (check) or disable (clear) the DLC/LLC (Data Link Control/Logical Link Control) protocols on the HP Jetdirect print server. If the checkbox is clear, DLC/LLC protocols are disabled.
ENWW | Using the Embedded Web Server 120 |
