![](/images/new-backgrounds/1213396/213396141x1.webp)
7.Edit the /etc/ethers file (/etc/rarpd.conf file in
00:01:E6:a8:b0:00 laserjet1
Note | If your system uses Network Information Service |
| (NIS), you need to incorporate changes to the NIS |
| host and ethers databases. |
|
|
8.Turn the printer on.
9.To verify that the card is configured with the correct IP address, use the ping utility. At the prompt, type:
ping <IP address>
where <IP address> is the assigned address from RARP.
10.If ping does not respond, see Chapter 8.
ENWW | TCP/IP Configuration 71 |