
Understanding the printer messages
Message | What this message means | What you can do | |
Queuing Jobs | The printer is sending one or more | Wait for the message to clear. | |
| held jobs to print. | See also: Using the Print and | |
|
|
| |
|
|
| Hold function |
|
|
| |
Ready | The printer is ready to receive and | Send a job to print. | |
| process print jobs. |
| |
|
|
| |
Ready Hex | The printer is in Hex Trace mode and | • Send a job to print. All data sent | |
| is ready to receive and process print | to the printer is printed in | |
| jobs. | hexadecimal and character | |
|
|
| representation. Control strings |
|
|
| are printed, not executed. |
|
|
| • Turn the printer off and then on to |
|
|
| exit Hex Trace mode and return |
|
|
| to Ready status. |
|
|
| |
Reattach <device> | The specified device is either not fully | • Reestablish communication by | |
| connected to the printer or is | removing the specified device | |
| experiencing a hardware failure. | and reattaching it to the printer. | |
| <device> is one of the following: | • Press Go to clear the message | |
| • Output bin x, where x is | and continue printing without | |
| using the device. | ||
| • Bins x - y, where x is | ||
| • In the case of a hardware failure, | ||
|
| ||
|
| turn the printer off and back on. If | |
| • | Env Feeder | |
| the error recurs, turn the printer | ||
|
|
| |
|
|
| off, remove the specified device, |
|
|
| and call for service. |
|
|
| See also: Contacting service |
|
|
| |
Remove Paper <specified | The specified output bin, or bins, is | Remove the stack of paper from the | |
bin> | full. The message would read as one | specified bin(s) to clear the | |
| of the following: | message. | |
| • | Remove Paper Standard Bin |
|
| • | Remove Paper Output Bin x, |
|
|
| where x is the bin number |
|
| • | Remove Paper All Output Bins |
|
|
|
| |
Res Reduced | The printer is reducing the resolution | Press Menu to open the Job Menu | |
| of a page in the current job from 600 | and cancel the current job. | |
| dots per inch (dpi) to 300 dpi to |
| |
| prevent a 38 Memory Full error. Res |
| |
| Reduced remains on the display while |
| |
| the job prints. |
| |
|
|
| |
Resetting Active Bin | The printer is resetting to the active | Wait for the message to clear. | |
| bin in a linked set of bins. |
| |
|
|
| |
Resetting | The printer is resetting the counter | Wait for the message to clear. | |
Maint Cnt Value | that tracks wear on the fuser. |
| |
|
|
| |
Resetting the Printer | The printer is resetting to the current | Wait for the message to clear. | |
| default settings. Any active print jobs | See also: Using the operator | |
| are canceled. | ||
| panel to change printer settings | ||
|
|
| |
|
|
|
|
271