![](/images/new-backgrounds/1158322/158322401x1.webp)
Removing options
Removing an optional output bin
Follow these instructions to remove any of the output bins: finisher,
1If you are removing the topmost output bin and do not plan to return it to that position, remove the top cover.
If you are removing a finisher, skip to step 4 on page 204.
You must attach the top cover to the printer or topmost output bin when you finish removing optional output bins. In addition, it may be necessary to remove the wire bail from the top cover, depending on the type of output bin to which it is attached. Refer to the Setup Guide for more information.
201