Using the printer menus

Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm-up time. Select a value between 1 and 240 minutes if you want a balance between energy consumption and a shorter warm-up period.

If the Disabled value is not available from the Power Saver menu item, see Disabling Power Saver for more information.

Resource Save

Purpose:

To determine what the printer does with downloaded resources, such as fonts and macros stored in RAM, if the printer receives a job that requires more memory than is available.

Values:

Off* Printer retains downloaded resources only until memory is needed. It then deletes those resources associated with the inactive printer language.

On Printer retains all downloaded resources for all printer languages during language changes and printer resets. If the printer runs out of memory,

38Memory Full is displayed.

Download Target

Purpose:

To specify the storage location for downloaded resources.

Values:

RAM* All downloaded resources are automatically stored in printer memory (RAM).

Flash All downloaded resources are automatically stored in flash memory.

Disk All downloaded resources are automatically stored on the hard disk.

Storing downloaded resources in flash memory or on a hard disk is permanent storage rather than the temporary storage that RAM provides. The resources remain in the flash memory or on the hard disk even when the printer is turned off. Use MarkVision to download resources to the printer.

Print Timeout

Purpose:

To specify the amount of time (in seconds) the printer waits before printing the last page of a print job that does not end with a command to print the page. The print timeout counter does not start until Waiting is displayed.

237

Page 237
Image 237
Lexmark 630 manual Resource Save, Download Target, Print Timeout