Using the printer menus
Values:
On Disables the resistors.
Off* Enables the resistors.
Parallel Mode 2
Purpose:
To determine whether the parallel port data is sampled on the leading or trailing edge of strobe.
Values:
On* Samples parallel port data on the leading edge of strobe.
Off Samples parallel port data on the trailing edge of strobe.
MAC Binary PS
Purpose:
To configure the printer to process Macintosh binary PostScript print jobs.
Values:
On Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system.
This setting often causes Windows print jobs to fail.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer processes print jobs from computers using either Windows or Macintosh operating systems.
Network Menu
Use the Network Menu to change printer settings affecting jobs sent to the printer through a network port (either Standard Network or Network Opt <x>).
Select a menu item for more details:
Job Buffering | PCL SmartSwitch |
Network Buffer | PS SmartSwitch |
Network <x> Setup | Std Net Setup |
NPA Mode |
|
Note: Values marked by an asterisk (*) are the factory default settings.
252
