24x Paper Jam Check Tray x

On the incline surface of a tray or across two trays

1Pull the tray halfway out of the support unit.

2Remove the print media based on how it is jammed:

If the print media is lying on the incline or wall surface at the front of the tray, pull the print media straight out.

If the print media is in the pass-through area across two trays, pull the print media straight up and out.

If you do not see either end of the print media, see Across three trays to remove the jam.

3Slide the tray back into the support unit.

152

Page 152
Image 152
Lexmark 630 manual On the incline surface of a tray or across two trays