Using the printer menus
Values:
Disabled The printer does not print the last page of a print job until one of the following occurs:
•The printer receives enough information to fill the page.
•The printer receives a Form Feed command.
•You select Print Buffer from the Job Menu.
1...255 (90*) The printer prints the last page after the specified time. (Your printer may not support the entire range of values.)
See also:
Print Buffer
Wait Timeout
Purpose:
To specify the amount of time (in seconds) the printer waits to receive additional bytes of data from the computer. When this timeout expires, the print job is canceled.
Values:
Disabled | Disables Wait Timeout. |
15...65535 (40*) Specifies the amount of time the printer waits for additional data before it cancels the job.
Note: Wait Timeout is only available when you use PostScript emulation. This menu item has no effect on PCL emulation print jobs.
Auto Continue
Purpose:
To define the amount of time (in seconds) the printer waits after displaying an operator intervention error message before it resumes printing.
Values:
Disabled* Printer does not resume printing until someone clears the error message.
5...255 Printer waits the specified amount of time, and then automatically resumes printing. This timeout value also applies if the menus are displayed (and the printer is offline) for the specified period of time.
Jam Recovery
Purpose:
To establish whether the printer reprints jammed pages.
238
