Using the printer menus

Serial Buffer

Purpose:

To configure the size of the serial input buffer.

Values:

Disabled

Disables job buffering. Any jobs already buffered on the disk are

 

printed before normal processing of incoming jobs resumes.

Auto*

Printer automatically calculates the Serial Buffer size (recommended

 

setting).

3K to maximum

User specifies the Serial Buffer size. The maximum size depends on

size allowed

the amount of memory in your printer, the size of the other link buffers,

 

and whether Resource Save is set to On or Off. To maximize the range

 

for the Serial Buffer size, disable or reduce the size of the parallel and

 

USB buffers.

Note: Changing the Serial Buffer menu item automatically resets the printer.

See also:

Resource Save

Job Buffering

Purpose:

To temporarily store jobs on the printer hard disk before printing.

Values:

Off* Does not buffer print jobs to the hard disk.

On Buffers print jobs to the hard disk.

Auto Buffers print jobs only if the printer is busy processing data from another input port.

Note: Changing the Job Buffering menu item automatically resets the printer.

Serial Protocol

Purpose:

To select the hardware and software handshaking values for the serial interface.

260

Page 260
Image 260
Lexmark 630 manual Serial Buffer, Serial Protocol