Lexmark 630 manual See also Print media guidelines

Understanding the printer messages

Message	What this message means	What you can do
32 Unsupported	An unsupported print cartridge is	Remove the print cartridge and
Print Cartridge	installed.	install a new one.
		Use Extra High Yield cartridges
		only in the T632.
		See also: Replacing the print
		cartridge
34 Short Paper	The printer has determined that the	• Press Go to clear the message
	length of the paper in the source	and continue printing. The printer
	specified on the second line of the	does not automatically reprint the
	display is too short to print the	page that prompted the
	formatted data. For auto-size sensing
		message.
	trays, this error occurs if the guides
		• Make sure the Paper Size setting
	are not in the correct position.
		in the Paper Menu is correct for
		the size paper you are using. If
		MP Feeder Size is set to
		Universal, make sure your paper
		is large enough for the formatted
		data.
		• Press Menu to open the Job
		Menu and cancel the current job.
		See also: Print media guidelines
35 Res Save Off Deficient	The printer lacks the memory needed	• Press Go to disable Resource
Memory	to enable Resource Save. This	Save and continue printing.
	message usually indicates too much	• To enable Resource Save after
	memory is allocated for one or more of
		you get this message:
	the printer link buffers.
		– Make sure the link buffers are
		set to Auto, and exit the menus
		to activate the link buffer
		changes.
		– When Ready is displayed,
		enable Resource Save from
		the Setup Menu.
		• Install additional memory.
37 Insufficient Collation	The printer memory (or hard disk, if	• Press Go to print the portion of
Area	installed) does not have the free space	the job already stored and begin
	necessary to collate the print job.	collating the rest of the job.
		• Press Menu to open the Job
		Menu and cancel the current job.
		See also: Canceling a print job
37 Insufficient Defrag	The printer cannot defragment flash	• Delete fonts, macros, and other
Memory	memory, because the printer memory	data in printer memory.
	used to store undeleted flash	• Install additional printer memory.
	resources is full.

274