Lexmark 630 See also Restoring factory, Default settings, See also Accessing held jobs, Restore

Understanding the printer messages

Message	What this message means	What you can do
Restore Held Jobs. Go/	Someone reset the printer or turned it	• Press Go. All Print and Hold jobs
Stop?	on, and the printer detects Print and	on the hard disk are restored to
	Hold jobs stored on the hard disk.	printer memory.
		• Press Return or Stop. No Print
		and Hold jobs are restored to
		printer memory. The printer
		returns to the Ready state.
		See also: Using the Print and
		Hold function
Restoring Factory Defaults	The printer is restoring the factory	Wait for the message to clear.
	default printer settings. When factory	See also: Restoring factory
	default settings are restored:
		default settings
	• All downloaded resources (fonts,
	macros, symbol sets) in the printer
	memory are deleted.
	• All menu settings return to the
	factory default setting except:
	– The Display Language setting in
	the Setup Menu.
	– All settings in the Parallel Menu,
	Serial Menu, Network Menu,
	USB Menu, and Fax Menu.
Restoring Held Job xxx/yyy	The printer is restoring held jobs from	• Wait for the message to clear.
	the hard disk.	• Select the Abort Restore menu
	Note: xxx represents the number of	item in the Job Menu.
	the job being restored. yyy represents	See also: Accessing held jobs
	the total number of jobs to be restored.
		from the operator panel; Abort
		Restore
Restoring Held Jobs	The printer is restoring held jobs from	Wait for the message to clear.
	the hard disk.	See also: Accessing held jobs
		from the operator panel; Abort
		Restore
Serial <x>	A serial interface is the active
	communication link.
Staples Empty	The stapler is out of staples, or the	If necessary, install a new staple
	stapler is not installed.	cartridge. Reinsert the stapler into
		the finisher.
Staples Low	The stapler has only a few staples	• Press Go to continue printing.
	remaining.	• Install a new staple cartridge to
		clear the message.
Std Bin Full	The standard bin is full.	Remove the stack of paper in the
		bin to clear the message.

272