Carrier Access none manual No ip secondary-dns, No ppp exec-timeout

Configuration - L2TPC Mode

no ip secondary-dns

Use the L2TPC no secondary-dnscommand to disable the secondary DNS. To enable the secondary DNS, see ip secondary-dnscommand on page 15-12.

Syntax: (config-l2tpc-{n})# no ip secondary-dns

Example: (config-l2tpc-1)# no ip secondary-dns

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp authentication

Use the L2TPC no ppp authentication command disable PPP authentication. To enable PPP authentication, see ppp authentication command on page 15-21.

Syntax: (config-l2tpc-{n})# no ppp authentication

Example: (config-l2tpc-1)# no ppp authentication

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp encryption

Use the L2TPC no ppp encryption command to disable PPP encryption. To enable PPP encryption, see ppp encryption command on page 15-21.

Syntax: (config-l2tpc-{n})# no ppp encryption

Example: (config-l2tpc-1)# no ppp encryption

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp exec-timeout

Use the L2TPC no ppp exec-timeoutcommand to disable PPP idle time. To set the PPP maximum idle time before hangup, see ppp exec-timeoutcommand on page 15-21.

Syntax: (config-l2tpc-{n})# no ppp exec-timeout

Example: (config-l2tpc-1)# no ppp exec-timeout

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

15-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI