Carrier Access none manual Adit 3000 Rel .6 and MSR Card Rel 2.0 CLI

Configuration - Voice Port FXS Mode

echo-cancel

Use the Voice Port FXS echo-cancelcommand to enable Echo Cancellation on this trunk. To to disable Echo Cancellation, see no echo-cancelcommand on page 23-6

Syntax: (config-vport-fxs-{n})# echo-cancel enable

Example: (config-vport-fxs-1)# echo-cancel enable

Supported Platforms: Adit 3104, Adit 3500, MSR

end

Use the end command to exit the current configuration mode, and must be used to mark the end of any configuration file.

Syntax: (config-vport-fxs-{n})# end

Example: (config-vport-fxs-1)# end

#

Supported Platforms: Adit 3104, Adit 3500, MSR

exit

Use the exit command to close your current connection if you are in the User mode, or Privileged mode. If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you to the next higher level (example: back to Privileged mode from Interface configuration mode).

Syntax: (config-vport-fxs-{n})# exit

Example: (config-vport-fxs-1)# exit

(config)#

Supported Platforms: Adit 3104, Adit 3500, MSR

23-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI