Carrier Access none manual Log t1 buffer, Log t1 notify, Syntax config# log t1 buffer kilobytes

Global Configuration Mode

Global Configuration Commands

log t1 buffer

Use the log t1 buffer command to set the buffer size allowed for the T1 log buffer.

Syntax: (config)# log t1 buffer kilobytes

Field	Definition
kilobytes	Set the size of the T1 log buffer. Range is 1 - 256 KB. Default is
	16KB.

Example: (config)# log t1 buffer 24

Supported Platforms: Adit 3104, Adit 3200, Adit 3500

log t1 notify

Use the log t1 notify command to set the remote T1 notify level.

Syntax: (config)# log t1 notify {errorinfoip-address address

nonewarn}

Field	Definition
error	Notify for error level.
info	Notify for information level.
ip-address address	Enter IP address of remote system to notify.
none	No notification.
warn	Notify for warning level.

Example: (config)# log t1 notify warn

Supported Platforms: Adit 3104, Adit 3200, Adit 3500

4-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI