Carrier Access none manual No remote-admin web, No router ospf

Global Configuration Mode

Global Configuration Commands

no remote-admin web

Use the no remote-admin web command to remove remote administration via Web-management. To enable remote access via the web, see remote-admin web command on page 4-56.

Syntax: (config)# no remote-admin web {primary-port primary-secure-portsecondary-portsecondary-secure-port}

Field	Definition
primary-port	Primary HTTP port, default port 80
primary-secure-	Primary HTTPS port, default port 443
port
secondary-port	Secondary HTTP port, default port 8080
secondary-secure-	Secondary HTTPS port, default port 8443
port

Example: (config)# no remote-admin web primary-port

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no router ospf

Use the no router ospf command to disable Router OSPF. See Chapter 16, Configuration - OSPF Mode for commands in this mode. To enter the OSPF configuration mode, see router ospf command on page 4-56.

CAUTION! A NO ROUTER OSPF COMMAND WILL DELETE ALL OF THE OSPF CONFIGURATION.

Syntax: (config)# no router ospf

Example: (config)# no router ospf

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-48 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI