Carrier Access none manual Syntax config-pptpc-n# no ip route dest-ip-addr gateway

Configuration - PPTPC Mode

no ip route

Use the PPTP Client no ip route command remove an IP route. To add a route, see ip route command on page 17-11.

Syntax: (config-pptpc-{n})# no ip route dest-ip-addr gateway

Field	Definition
dest-ip-addr	Enter destination IP address to remove.
gateway	Enter gateway IP address to remove.

Example: (config-pptpc-1)# no ip route 192.168.100.200 192.168.100.254

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ip secondary-dns

Use the PPTP Client no secondary-dnscommand to disable the secondary DNS. To enable the secondary DNS, see ip secondary-dnscommand on page 17-12.

Syntax: (config-pptpc-{n})# no ip secondary-dns

Example: (config-pptpc-1)# no ip secondary-dns

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp authentication

Use the PPTP Client no ppp authentication command disable PPP authentication. To enable PPP authentication, see ppp authentication command on page 17-20.

Syntax: (config-pptpc-{n})# no ppp authentication

Example: (config-pptpc-1)# no ppp authentication

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp encryption

Use the PPTP Client no ppp encryption command to disable PPP encryption. To enable PPP encryption, see ppp encryption command on page 17-20.

Syntax: (config-pptpc-{n})# no ppp encryption

Example: (config-pptpc-1)# no ppp encryption

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-17