Carrier Access none manual Show ip ospf interface, Ethernet port, Serial port, Multilink port

User Mode

show ip ospf interface

Use the show ip ospf interface command to display OSPF related interface information.

Syntax: > show ip ospf interface {ethernet portserial portmultilink

port}

Field	Definition
ethernet port	Display information on the Ethernet interface.
	port = 1 or 2
serial port	Display information on the serial interface.
	Adit 3104: Value must be 1.
	Adit 3500: Range = 1-4.
	MSR: Range = 1-8.
multilink port	Display information on the Multilink interface.
	Adit 3104, Adit 3500, MSR: Value must be 1

Example: adit 3500> show ip ospf interface ethernet 1

Ethernet 1 is up, line protocol is up

Internet Address 192.168.254.202, Mask 255.255.255.0, Area 0.0.0.0 AS 201, Router ID 192.168.99.1, Network Type BROADCAST, Cost: 10 Transmit Delay is 1 sec, State OTHER, Priority 1

Designated Router id 192.168.254.10, Interface address 192.168.254.10 Backup Designated router id 192.168.254.28, Interface addr 192.168.254.28 Timer intervals configured, Hello 10, Dead 60, Wait 40, Retransmit 5 Hello due in 0:00:05

Neighbor Count is 8, Adjacent neighbor count is 2

Adjacent with neighbor 192.168.254.28 (Backup Designated Router) Adjacent with neighbor 192.168.254.10 (Designated Router)

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-21