Carrier Access none manual Example adit 3500# show Ip ospf neighbor

Privileged Mode

show ip ospf neighbor

Use the show ip ospf neighbor command to display OSPF neighbor information.

Syntax: # show ip ospf neighbor [interface addressneighbor-iddetail]

	Field			Definition
	interface address			Optional parameter. Enter interface IP address to define display.
	neighbor-id			Optional parameter. Enter neighbor IP address to define display.
	detail			Optional parameter. Enable display of detailed information.
Example: adit 3500# show				ip ospf neighbor
ID		Pri	State		Dead Time	Address	Interface
10.199.199.137		1	FULL/DR		0:00:31	192.168.80.37	Ethernet1
172.16.48.1		1	FULL/DROTHER		0:00:33	172.16.48.1	Fddi0
172.16.48.200		1	FULL/DROTHER		0:00:33	172.16.48.200	Fddi0
10.199.199.137		5	FULL/DR		0:00:33	172.16.48.189	Fddi0

Example: adit 3500# show ip ospf neighbor 10.199.199.137

Neighbor 10.199.199.137, interface address 192.168.80.37

In the area 0.0.0.0 via interface Ethernet0

Neighbor priority is 1, State is FULL

Options 2

Dead timer due in 0:00:32

Link State retransmission due in 0:00:04

Neighbor 10.199.199.137, interface address 172.16.48.189

In the area 0.0.0.0 via interface Fddi0

Neighbor priority is 5, State is FULL

Options 2

Dead timer due in 0:00:32

Link State retransmission due in 0:00:03

Example: adit 3500# show ip ospf neighbor detail

Neighbor 192.168.5.2, interface address 10.225.200.28

In the area 0 via interface GigabitEthernet1/0/0

Neighbor priority is 1, State is FULL, 6 state changes

DR is 10.225.200.28 BDR is 10.225.200.30

Options is 0x42

LLS Options is 0x1 (LR), last OOB-Resync 00:03:08 ago

Dead timer due in 00:00:36

Neighbor is up for 00:09:46

Index 1/1, retransmission queue length 0, number of retransmission 1 First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)

Last retransmission scan length is 1, maximum is 1

Last retransmission scan time is 0 msec, maximum is 0 msec

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-45