Carrier Access none manual Adit 3000 Rel .6 and MSR Card Rel 2.0 CLI

Configuration - Multilink Interface Mode

no schedule-availability

Use the Multilink Interface no schedule-availabilitycommand to disable a schedule rule. To add a rule, see schedule-availabilitycommand on page 12-24.

Syntax: (config-int-mlink-{n})# no schedule-availability

Example: (config-int-mlink-1)# no schedule-availability

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no shutdown

Use the Multilink Interface no shutdown command to set the Multilink port up (In-Service).To set the interface down (Out-of-Service), see shutdown command on page 12-24.

Syntax: (config-int-mlink-{n})# no shutdown

Example: (config-int-mlink-1)# no shutdown

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no sip-alg

Use the Multilink Interface no sip-algcommand to disable SIP ALG on this interface. To enable SIP ALG, see sip-algcommand on page 12-25.

Syntax: (config-int-mlink-{n})# no sip-alg

Example: (config-int-mlink-1)# no sip-alg

Supported Platforms: Adit 3104, Adit 3500, MSR

12-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI