Panasonic PT-LB51NTU Technical Information Cable specifications, Control commands, Projector

Technical Information

Cable specifications

(When connected to a personal computer)

Projector

PC (DTE)

Control commands

Command	Control contents		Remarks
		In standby mode, all commands other than the PON command are
PON	Power ON	ignored.
		The PON command is ignored during lamp ON control.
		If a PON command is received while the cooling fan is operating after the
POF	Power OFF	lamp has switched off, the lamp is not turned back on again straight away
		in order to protect the lamp.
AVL	Volume	Parameter
		000 - 063 (Adjustment value 0 - 63)
		Parameter:
IIS	INPUT	VID = VIDEO	SVD = S-VIDEO
		RG1 = COMPUTER1	RG2 = COMPUTER2
		NWP = WIRELESS (PT-LB51NTU only)
	Lamp condition	Call back
Q$S		0 = Standby	2 = Lamp ON
	query
		1 = Lamp ON control active	3 = Lamp OFF control active
		Turning off the projection temporarily.
		Send the command to switch between ON and OFF.
OSH	SHUTTER	Do not send the command consecutively.
		If a command other than “OSH” is sent to the projector when the shutter
		function is used, the “ER401” command will be sent from the projector to
		the computer and the shutter function will be turned off.

Appendix

ENGLISH - 46