Panasonic PT-LB51NTU Resetting to the factory default settings, Remote control operation, English

		Remote control operation
Resetting to the factory default settings
	You can reset most of the customised settings
	to the factory defaults by pressing DEFAULT	NOTE:
	button of the Remote control. Display the	• Some menu items are not available to reset by pressing
	required sub menu or the menu items and	the DEFAULT button. Adjust each menu items
	press the DEFAULT button again.	manually.

See “Main menu and Sub-menu” on page 28.

Projecting an image in INDEX-WINDOW mode

You can project an image in split 2 windows as an INDEX-WINDOW, one is frozen, stored in memory and displayed on the screen’s left side, while the display of subsequent images continues on the right.

To escape from the INDEX-WINDOW, press the RETURN button.

Projected image Frozen image

Continuing image

Switching the position

In default, the frozen image is displayed on the left and the subsequent image is displayed on the right. Press I H to switch the position.

Frozen image Continuing image

Continuing image Frozen image

Changing the image size

Press F G to switch and cycle through in 3 size.

Frozen image

Continuing image

Capturing a new image

While in INDEX-WINDOWmode, press ENTER to capture a new image and the frozen image window will be updated in a while.

NOTE:

•If you change the window size, the aspect ratio of the image is changed and becomes vertically elongated.

•This operation can also be carried out using the INDEX-WINDOWcommand in the MAIN MENU. See “INDEX-WINDOW” on page 36.

•When FUNCTION BUTTON is set to “INDEX WINDOW” (see “FUNCTION BUTTON” on page 34), the INDEX-WINDOWoperation can also be carried out by pressing the FUNCTION button at the front of the projector.

Basic Operation

ENGLISH - 25