Emerson iE600 owner manual Remote Control Battery

Models: iE600

1 52
Download 52 pages 7.94 Kb
Page 10
Image 10
Remote Control

Remote Control

The remote control supplied with this system allows you to operate all of the features and functions found on the main unit control panel. The remote receiver is located on the left side of the front panel display. To operate the remote control, aim the handset at the receiver on the front panel and press the appropriate button on the remote handset.

The effective operating distance of the remote control is approximately 15 feet from the remote receiver on the front panel.

IMPORTANT! Please note that the iPod® Shuffle has no interface to accept commands from a remote control. The remote control of this system will not operate an iPod® Shuffle. You must use the controls on the Shuffle itself to operate an iPod® Shuffle.

Remote Control Battery

The remote control operates on one 3V lithium ‘button’battery, Type CR2032 or equivalent. The battery was installed in the remote when you purchased this system.

To preserve the life of the battery a small clear plastic spacer tab is installed between the battery and the battery terminal. This tab must be removed before the remote control can be used.

To remove the tab simply pull it out of the battery compartment, as shown, and discard it.

9

iE600_050407.p65

9

4/5/2007, 11:50

Page 10
Image 10
Emerson iE600 owner manual Remote Control Battery