Playing Compact Discs
NOTE: This system can play normal CDs, recordable CDs
Also please be aware that because MP3 CDs contain much more information than normal commercially recorded CDs, the time required for the CD player to read the Table of Contents (TOC) and begin playback on an MP3 CD can be much longer than for a normal CD. Please be patient. Again, this is not an indication of any problem with your system.
1.) Press on the right front corner of the CD door to release the lock and open the door. If you have not already done so, remove the dummy CD transit protection card from the CD mechanism and discard it.
2.) Place your CD on the center spindle with the printed label side facing up. Gently press downward on the disc near the center hole to make sure that it is properly seated on the spindle.
Close the CD door by pressing on the right front corner until the door locks again.
3.) Press the CD Play/Pause button to begin playback.
NOTE: It is not necessary to press the Power button first.
The CD Play indicator appears in the display as the player reads the disc, then the display shows Track “01” and the elapsed time indicator.
4.) Adjust the Volume, EQ or Bass/Treble, and Surround controls as desired.
27
iE600_050407.p65 | 27 |
4/5/2007, 11:50