Emerson iE600 owner manual Charging the iPod Battery

4.) Press the iPod/Shuffle button on this system to select the iPod Shuffle function.

The “iPodShuffle” indicator appears in the display.

5.) Press the Volume + / – buttons on this system to adjust volume until the Volume Level Indicator display is showing “25”.

Press the iPod Play/Pause button on the iPod® Shuffle to begin playback in either the Normal or Shuffle mode, according to your selection in Step 1 above.

NOTE: Pressing the iPod Play/Pause on the top panel of this system has no effect for the iPod® Shuffle.

7.) Press the Volume + / – buttons on the iPod® Shuffle to adjust the iPod® volume level. If necessary you can then go back and make final up or down adjustments to the volume controls on this system.

8.) To skip forward or back, to perform high-speed search, to pause or to stop playback, press the corresponding controls on the iPod® Shuffle as usual.

9.) When you are finished listening, remove the iPod® Shuffle, switch it ‘Off’, and replace the protective cap.

10.) Press the Power button on this system to turn the power ‘Off’.

Charging the iPod® Battery

When your iPod® is connected to the docking station of this system, and the iPod® is not playing, the iPod® battery will be recharged automatically. The battery will be charged whether the power of this system is ‘On’or ‘Off’. It will be charged during CD playback or while you are listening to an external auxiliary music source.

NOTE: To prevent interference between the battery charging circuit and the radio in this system the battery charging circuit is turned off while you are listening to the radio. When you shut the radio off, battery charging resumes automatically.

38

iE600_050407.p65 38

4/5/2007, 11:50