TROUBLESHOOTING
Should this unit exhibit a problem, check the following before seeking service.
Symptom | Possible Cause | Solution |
General
No operation | Subject to a severe power surge |
| or electric shock. |
Unplug the AC power plug from the AC power outlet. After around few seconds, insert the AC plug back into the AC power outlet.
Reset the unit by pressing the RESET button.
Radio
Noise or sound | Station is not tuned properly for AM |
distortion on AM or | or FM. |
FM broadcasts. | FM: Wire antenna is not extended. |
| AM: The bar antenna is not |
| positioned correctly. |
AM or FM | AM or FM mode is not selected. |
no sound. |
|
| Volume at minimum level. |
Retune the AM or FM broadcast station. Extend FM wire antenna. Reposition the unit until best reception is obtained Press Band/Radio button to select AM or FM band. Increase Volume level.
CD Player
CD Player does | CD mode is not selected. |
not play. |
|
| CD is not installed or installed |
| incorrectly. |
CD skips while | Disc is dirty or scratched. |
playing. |
|
iPod® |
|
iPod® does not | iPod mode is not selected. |
play. |
|
iPod® playback | iPod® EQ is ‘On’. |
sound distorted. |
|
Press CD 
button to select CD mode.
Press the CD onto spindle, printed side facing up. Wipe with cloth or use another disc.
Ensure an iPod® Shuffle or iPod® is connected to the unit. Press iPod/Shuffle button
to select iPod or iPod Shuffle.
Press iPod 
button to start playback.
Switch iPod® EQ ‘Off’.
47
iE600_050407.p65 | 47 |
4/5/2007, 11:50
