NOTES:
A.) Use the Manual Tuning method to tune to weak stations that are bypassed during Automatic Tuning.
B.) During Automatic Tuning if the tuner does not stop on the exact frequency of your station, for example, the display shows FM 103.55 instead of FM 103.5 - use the Manual Tuning method to “fine tune” up or down to the exact frequency.
C.) If you are listening to a very weak FM Stereo station, try pressing the Radio/Band button to select the FM MONO mode. This will normally improve the reception although the sound will no longer be in stereo.
3.) Adjust the Volume, EQ or Bass/Treble, and Surround controls as desired.
4.) When you are finished listening press the 
Power button to shut the system ‘Off’. The display lighting and edge lighting go off and the display changes from radio frequency to the correct time, month and date display.
NOTE: The system remembers the last station you were listening to, plus the Volume and EQ settings you selected before switching the power off, and automatically returns to those same settings when the radio is switched on again.
Antenna Information
AM
The AM bar antenna is inside the cabinet. It may be necessary to adjust the position of the cabinet until the internal antenna is receiving the strongest possible signal.
FM
Make sure that the FM wire antenna is firmly attached to the screw terminal on the bottom cabinet. It may be necessary to adjust the position of the FM wire antenna to find the position that provides the best FM reception.
24
iE600_050407.p65 | 24 |
4/5/2007, 11:50
