Carrier Access none manual Prompt Identifier

Introduction

Overview

Prompt Identifier

When you initiate a CLI session it will open in User mode, which is indicated by the ">" prompt. At any time you can quickly determine which mode you are in by the prompt.

Command	Access Method	Prompt Displayed	Exit Method
Mode
User	Login	adit 3104>	Use the logout command
		adit 3200>
		adit 3500>
		adit MSR>
Privileged	From User mode, enter the	adit 3104#	Use the exit or end command.
	enable command	adit 3200#
		adit 3500#
		adit MSR#
Global	From Privileged mode, enter	adit 3104 (config)#	Use the exit or end command, or
Configuration	the configure terminal	adit 3200 (config)#	press Ctrl-z.
	command.	adit 3500 (config)#
		adit MSR (config)#

User Mode

In User Mode, the operator is allowed to view only limited information (not able to modify configurations). Editing the configuration requires you to be in Privileged mode.

Privileged Mode

Privileged mode requires a password, and allows the operator to enter the Configuration mode.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 1-3