Carrier Access none manual Username, Vlan global, Admin, Monitor, Operator

Global Configuration Mode

Global Configuration Commands

username

Use the username command to create/modify a user profile for CLI. To delete a username, see no username command on page 4-51.

Syntax: (config)# username name password password {adminmonitor operator}

Field	Definition
name	Enter a User name, with a maximum of 15 characters.
password	Password for the user, with a maximum of 15 characters. This is an
	optional parameter. Default is "password".
admin	Read/write privileges, including user access management.
monitor	Read only privileges. Default is monitor.
operator	Read/write privileges, excluding user access management.

Example: (config)# username johndoe password mypassword operator

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

vlan (global)

Use the vlan command to allow access to the global VLAN configuration commands. See Chapter 20, Configuration - VLAN Mode for commands in this mode. To clear VLANs, see the no vlan command on page 4-52.

Syntax: (config)# vlan

Example: (config)# vlan (config-vlan)#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-63