Carrier Access none manual No port, No voip-interface

Configuration - VLAN Port Mode

no commands

no port

Use the VLAN no port command to remove this port’s membership from the VLAN. To set the preferences, see port command on page 21-4.

Syntax: (config-vlan-{n})# no port ethernet port

Field

port

Definition

Ethernet port in the form {port}.{sub-interface}. Adit 3104 and Adit 3200: 1.1, 1.2, 1.3, 1.4, 2.1 Adit 3500 and MSR: 1.1 and 2.1

Example: (config-vlan-100)# no port ethernet 1.1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500

no voip-interface

Use the VLAN no voip-interfacecommand to clear VLAN tagging for the originating VoIP traffic.

Syntax: (config-vlan-{n})# no voip-interface

Example: (config-vlan-100)# no voip-interface

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

port

Use the VLAN port command to set the Ethernet port as a VLAN port member.

Syntax: (config-vlan-{n})# port ethernet port

Field

port

Definition

Ethernet port in the form {port}.{sub-interface}. Adit 3104 and Adit 3200: 1.1, 1.2, 1.3, 1.4, 2.1 Adit 3500 and MSR: 1.1 and 2.1

Example: (config-vlan-100)# port ethernet 1.1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

21-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI